unisonic technologies co., ltd 9015 preliminary pnp epitaxial silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r201-032,ba pre-amplifier, low level & low noise ? features * high total power dissipation. (450mw) * excellent hfe linearity. * complementary to utc 9014 ? ordering information ordering number lead free halogen free package packing 9015l-x-t92-b 9015g-x-t92-b to-92 tape box 9015L-X-T92-K 9015g-x-t92-k to-92 bulk 9015l-x-t92-t 9015g-x-t92-t to-92 tape reel
9015 preliminary pnp epitaxial silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r201-032,ba ? absolute maximum ratings ( ta=25 c, unless otherwise specified ) parameter symbol ratings unit collector-base voltage v cbo -50 v collector-emitter voltage v ceo -45 v emitter-base voltage v ebo -5 v collector current i c -100 ma collector dissipation p c 450 mw junction temperature t j +150 c storage temperature t stg -55~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (ta=25 c, unless otherwise specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c = -100 a, i e = 0 -50 v collector-emitter breakdown voltage bv ceo i c = -1ma, i b = 0 -45 v emitter-base breakdown voltage bv ebo i e = -100 a, i c = 0 -5 v collector-emitter satu ration voltage v ce(sat) i c = -100ma, i b = -5ma -0.2 -0.7 v base-emitter satura tion voltage v be(sat) i c = -100ma, i b = -5ma -0.82 -1.0 v base-emitter on voltage v be(on) v ce = -5v, i c = -2ma -0.6 -0.65 -0.75 v collector cutoff current i cbo v cb = -50v, i e =0 -50 na emitter cutoff current i ebo v eb = -5v, i c =0 -100 na dc current gain h fe v ce =-5v, i c = -1ma 60 200 600 output capacitance c ob v cb = -10v, i e =0, f =1mhz 4.5 7.0 pf current gain-bandwidth product f t v ce = -5v, i c = -10ma 100 190 mhz noise figure nf v ce = -5v, i c = -0.2ma f = 1khz, rs = 1k 0.7 10 db ? classification of h fe rank a b c range 60-150 100-300 200-600 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
